-
files/heavy-duty-1-inch-stainless-steel-flagpole-bracket.png
-
files/triple-lock-butterfly-screws-flag-pole-holder.jpg
-
files/house-porch-wall-mount-flagpole-bracket.jpg
-
files/dual-position-45-90-degree-flag-mount.jpg
-
files/1-inch-flagpole-bracket-dimensions-specs.jpg
-
files/rustproof-wind-resistant-flag-holder-features.jpg
-
files/versatile-marine-truck-residential-flag-holder.jpg
-
files/flagpole-bracket-mounting-hardware-screws-kit.jpg
-
files/riayer-heavy-duty-stainless-steel-flagpole-bracket-with-hardware.jpg
Dual-Angle Display (45° & 90°) | Heavy-Duty 304 Stainless Steel | Fits 1" Flagpoles
Product Overview
Stop replacing rusty, snapped brackets. The RiaYer Heavy-Duty Flagpole Bracket is engineered from solid 304 Stainless Steel to withstand high winds and harsh marine environments without corroding. Unlike standard aluminum mounts that snap under pressure, this wall-mount flag holder features a robust structural design with a Triple-Locking System. Three stainless steel butterfly screws bite deeply into the pole, ensuring your flag flies proud and steady at either a 45° angled or 90° horizontal position, season after season.
Key Features
- 📐 2-Position Versatility: Display your flag your way. The dual-port design allows you to fly your flag at a classic 45° upward angle or a 90° horizontal position for maximum visibility.
- 🛡️ Marine-Grade 304 Stainless Steel: Offers superior rust, weather, and corrosion resistance compared to cheap cast aluminum or plastic brackets. Perfect for coastal homes, boats, and commercial buildings.
- 🔒 Triple-Lock Security: Equipped with three adjustable stainless steel butterfly thumb screws. This triangular locking mechanism grips the 1-inch flagpole firmly, preventing it from spinning or rattling in high winds.
- 💧 Smart Drainage System: Designed with a strategic drainage hole at the base of the holder to prevent rain water accumulation, protecting both the bracket and your flagpole from internal rust.
- 📏 Universal 1" Fit: The inner diameter of 1.02" (26mm) is precision-sized to accommodate all standard 1-inch diameter flagpoles (and smaller) with a snug, wobble-free fit.
Technical Specifications
| Material | Premium 304 Stainless Steel |
| Fits Pole Diameter | Up to 1" (25.4mm) |
| Inner Tube Diameter | 1.02" (26mm) |
| Display Angles | 45° (Angled) and 90° (Horizontal) |
| Base Width | 4.3" (110mm) |
| Total Height | 3.1" (80mm) |
| Fastening Type | 3x Butterfly Thumb Screws |
Installation Guide
- Mark Locations: Place the bracket against the wall or post (wood, concrete, or brick). Use the three base holes to mark your drilling points.
- Drill & Mount: Drill pilot holes. Insert wall expansion anchors (if mounting on concrete/brick). Secure the bracket tightly using the included heavy-duty screws.
- Insert Pole: Slide your 1-inch house flagpole into either the 45° or 90° slot depending on your preferred display angle.
- Secure: Hand-tighten the three butterfly screws until they firmly grip the flagpole. No tools required for this step!
What's in the Box (1 Set Kit)
- 1x RiaYer 304 Stainless Steel Flagpole Bracket
- 3x Butterfly Thumb Screws (Pre-installed)
- 3x Mounting Screws & Expansion Anchors
- *Note: Flagpole and flag are not included. Fits poles ≤ 1 inch outside diameter.
Versatile Applications
Built tough for both residential and commercial use:
- ✔ House Porch Walls
- ✔ Wooden Garden Posts
- ✔ Roof Eaves & Fascia
- ✔ Truck Beds / RVs
- ✔ Commercial Storefronts
- ✔ Marine Boat Docks
Why Choose RiaYer Flag Pole Holders?
Cheap aluminum brackets rust and snap in the wind, risking damage to your property. RiaYer brackets are built different. By using genuine heavy-duty 304 Stainless Steel and adding a smart drainage system, we ensure your flag stays flying for years, not months. The tool-free butterfly screw design makes angle adjustments easy for everyone.
RiaYer
RiaYer Heavy-Duty 304 Stainless Steel Flagpole Bracket | 2-Position Flag Pole Holder (Fits 1" Pole)
- Regular price
- $19.99
Dual-Angle Display (45° & 90°) | Heavy-Duty 304 Stainless Steel | Fits 1" Flagpoles
Product Overview
Stop replacing rusty, snapped brackets. The RiaYer Heavy-Duty Flagpole Bracket is engineered from solid 304 Stainless Steel to withstand high winds and harsh marine environments without corroding. Unlike standard aluminum mounts that snap under pressure, this wall-mount flag holder features a robust structural design with a Triple-Locking System. Three stainless steel butterfly screws bite deeply into the pole, ensuring your flag flies proud and steady at either a 45° angled or 90° horizontal position, season after season.
Key Features
- 📐 2-Position Versatility: Display your flag your way. The dual-port design allows you to fly your flag at a classic 45° upward angle or a 90° horizontal position for maximum visibility.
- 🛡️ Marine-Grade 304 Stainless Steel: Offers superior rust, weather, and corrosion resistance compared to cheap cast aluminum or plastic brackets. Perfect for coastal homes, boats, and commercial buildings.
- 🔒 Triple-Lock Security: Equipped with three adjustable stainless steel butterfly thumb screws. This triangular locking mechanism grips the 1-inch flagpole firmly, preventing it from spinning or rattling in high winds.
- 💧 Smart Drainage System: Designed with a strategic drainage hole at the base of the holder to prevent rain water accumulation, protecting both the bracket and your flagpole from internal rust.
- 📏 Universal 1" Fit: The inner diameter of 1.02" (26mm) is precision-sized to accommodate all standard 1-inch diameter flagpoles (and smaller) with a snug, wobble-free fit.
Technical Specifications
| Material | Premium 304 Stainless Steel |
| Fits Pole Diameter | Up to 1" (25.4mm) |
| Inner Tube Diameter | 1.02" (26mm) |
| Display Angles | 45° (Angled) and 90° (Horizontal) |
| Base Width | 4.3" (110mm) |
| Total Height | 3.1" (80mm) |
| Fastening Type | 3x Butterfly Thumb Screws |
Installation Guide
- Mark Locations: Place the bracket against the wall or post (wood, concrete, or brick). Use the three base holes to mark your drilling points.
- Drill & Mount: Drill pilot holes. Insert wall expansion anchors (if mounting on concrete/brick). Secure the bracket tightly using the included heavy-duty screws.
- Insert Pole: Slide your 1-inch house flagpole into either the 45° or 90° slot depending on your preferred display angle.
- Secure: Hand-tighten the three butterfly screws until they firmly grip the flagpole. No tools required for this step!
What's in the Box (1 Set Kit)
- 1x RiaYer 304 Stainless Steel Flagpole Bracket
- 3x Butterfly Thumb Screws (Pre-installed)
- 3x Mounting Screws & Expansion Anchors
- *Note: Flagpole and flag are not included. Fits poles ≤ 1 inch outside diameter.
Versatile Applications
Built tough for both residential and commercial use:
- ✔ House Porch Walls
- ✔ Wooden Garden Posts
- ✔ Roof Eaves & Fascia
- ✔ Truck Beds / RVs
- ✔ Commercial Storefronts
- ✔ Marine Boat Docks
Why Choose RiaYer Flag Pole Holders?
Cheap aluminum brackets rust and snap in the wind, risking damage to your property. RiaYer brackets are built different. By using genuine heavy-duty 304 Stainless Steel and adding a smart drainage system, we ensure your flag stays flying for years, not months. The tool-free butterfly screw design makes angle adjustments easy for everyone.
- Regular price
- $19.99
Dual-Angle Display (45° & 90°) | Heavy-Duty 304 Stainless Steel | Fits 1" Flagpoles
Product Overview
Stop replacing rusty, snapped brackets. The RiaYer Heavy-Duty Flagpole Bracket is engineered from solid 304 Stainless Steel to withstand high winds and harsh marine environments without corroding. Unlike standard aluminum mounts that snap under pressure, this wall-mount flag holder features a robust structural design with a Triple-Locking System. Three stainless steel butterfly screws bite deeply into the pole, ensuring your flag flies proud and steady at either a 45° angled or 90° horizontal position, season after season.
Key Features
- 📐 2-Position Versatility: Display your flag your way. The dual-port design allows you to fly your flag at a classic 45° upward angle or a 90° horizontal position for maximum visibility.
- 🛡️ Marine-Grade 304 Stainless Steel: Offers superior rust, weather, and corrosion resistance compared to cheap cast aluminum or plastic brackets. Perfect for coastal homes, boats, and commercial buildings.
- 🔒 Triple-Lock Security: Equipped with three adjustable stainless steel butterfly thumb screws. This triangular locking mechanism grips the 1-inch flagpole firmly, preventing it from spinning or rattling in high winds.
- 💧 Smart Drainage System: Designed with a strategic drainage hole at the base of the holder to prevent rain water accumulation, protecting both the bracket and your flagpole from internal rust.
- 📏 Universal 1" Fit: The inner diameter of 1.02" (26mm) is precision-sized to accommodate all standard 1-inch diameter flagpoles (and smaller) with a snug, wobble-free fit.
Technical Specifications
| Material | Premium 304 Stainless Steel |
| Fits Pole Diameter | Up to 1" (25.4mm) |
| Inner Tube Diameter | 1.02" (26mm) |
| Display Angles | 45° (Angled) and 90° (Horizontal) |
| Base Width | 4.3" (110mm) |
| Total Height | 3.1" (80mm) |
| Fastening Type | 3x Butterfly Thumb Screws |
Installation Guide
- Mark Locations: Place the bracket against the wall or post (wood, concrete, or brick). Use the three base holes to mark your drilling points.
- Drill & Mount: Drill pilot holes. Insert wall expansion anchors (if mounting on concrete/brick). Secure the bracket tightly using the included heavy-duty screws.
- Insert Pole: Slide your 1-inch house flagpole into either the 45° or 90° slot depending on your preferred display angle.
- Secure: Hand-tighten the three butterfly screws until they firmly grip the flagpole. No tools required for this step!
What's in the Box (1 Set Kit)
- 1x RiaYer 304 Stainless Steel Flagpole Bracket
- 3x Butterfly Thumb Screws (Pre-installed)
- 3x Mounting Screws & Expansion Anchors
- *Note: Flagpole and flag are not included. Fits poles ≤ 1 inch outside diameter.
Versatile Applications
Built tough for both residential and commercial use:
- ✔ House Porch Walls
- ✔ Wooden Garden Posts
- ✔ Roof Eaves & Fascia
- ✔ Truck Beds / RVs
- ✔ Commercial Storefronts
- ✔ Marine Boat Docks
Why Choose RiaYer Flag Pole Holders?
Cheap aluminum brackets rust and snap in the wind, risking damage to your property. RiaYer brackets are built different. By using genuine heavy-duty 304 Stainless Steel and adding a smart drainage system, we ensure your flag stays flying for years, not months. The tool-free butterfly screw design makes angle adjustments easy for everyone.
-
Vendor: RiaYer
RiaYer 1.5" (38mm) Angled Marine Diesel Deck Fill | Keyless Boat Fuel Cap, 316 Stainless Steel
Regular price From $25.99 -
Vendor: RiaYer
RiaYer 1.5" (38mm) Straight Marine Diesel Deck Fill | Keyed Locking Boat Fuel Cap, 316 SS
Regular price From $24.99 -
Vendor: RiaYer
RiaYer 4" Heavy Duty 316 Stainless Steel Marine T-Hinge
Regular price From $15.99 -
Vendor: RiaYer
RiaYer 6" Heavy Duty 316 Stainless Steel Marine T-Hinge
Regular price From $21.99
Frequently Bought Together
-
Vendor: RiaYer
RiaYer 1.5" (38mm) Angled Marine Diesel Deck Fill | Keyless Boat Fuel Cap, 316 Stainless Steel
Regular price From $25.99 -
Vendor: RiaYer
RiaYer 1.5" (38mm) Straight Marine Diesel Deck Fill | Keyed Locking Boat Fuel Cap, 316 SS
Regular price From $24.99 -
Vendor: RiaYer
RiaYer 4" Heavy Duty 316 Stainless Steel Marine T-Hinge
Regular price From $15.99 -
Vendor: RiaYer
RiaYer 6" Heavy Duty 316 Stainless Steel Marine T-Hinge
Regular price From $21.99
